Thread: Motor height on bracket
View Single Post
  #9  
Old 03-08-2010, 10:11 PM
thehermit thehermit is offline
Senior Member
  
Join Date: Aug 2006
Location: Chatham, MA
Posts: 777
Default Re: Motor height on bracket
BTT

I am about 3 3/4 to cav plate and motor was acting to high but looked too low. Blowing out in turns. I am lowering it by about 1" to start the season. I should have adjustment back up from here.


Setback is 28"
Bracket keel is 4" above keel.
__________________
__________________________________________________ ________________
1974 23SF
Reply With Quote