Will you are doing an awsome job. you are a one man wrecking crew! Are you doing the deck out of epoxy? I should by stock in West System before you do! One thing that I will suggest is
make a small radius around the hatch with the putty or the mold wax I used.
After you spray your primer or gelcoat down and your skin coat(first layer of mat) you are gonna need some deck putty if you are using polyester, or micro ballons if you are using epoxy.
The reason you need it is becuase after the skin coat fill in any hard angles on the mold so the 1708 doesnt have to make any hard bends. you dont want to be fighting with 1708 while in the middle of the layup. I showed a pick of us filling voids with the putty. dont wait for it to cure either lay the glass right on top nice and wet so they bond together making a rock hard edge. you are definately going to need it for around the outside of the rear hatch.
try to have your wife take some pics while the layup is going on, as you are gonna be to busy to do it !!
the link for the radius wax of you cant find it.
http://www.freemansupply.com/FreemanHalfRoundWa.htm