Hi jwclbi:
I made my own but used Lexan not Plexiglass. You can use a thinner sheet for Lexan and it will not crack and break. I used a heat gun and supported both sides with wood clamped together and then exposed approx 1” or 2” space in the middle and bent. It came out good and I have bent some other things since then.
Here is a thread on it.
http://www.classicseacraft.com/forum...=&fpart=1&vc=1
FellowShip
………………………….
Just for the Grins
Official Antique Classic SeaCraft Owner