Quote:
I have a 1976 inboard and am using the pins that "Big Lew" is suggesting. You might try them at the rear of the console and keep the hinges at the front. Also re-enforcing the inside of the console wherever the T-Top connects to it will do wonders as far as vibration goes. I added a few pieces of 1/4" versatex (any plastic or plywood will do) at the attachment points and noticed a big difference.
|
Not only at the rear of the console but also inside where bare feet will not accidently catch them.
I second the advice for intalling some re-inforcement wood "cleats" to dampen the vibration, Be sure to stategically place them.
Good luck!