Thread: floor drains
View Single Post
  #7  
Old 07-08-2011, 11:47 AM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default Re: floor drains

Quote:
While you're waiting for the tubing you might consider filling and re-drilling the holes.
Make sure you dry out the wood blocks through which the tubes pass before filling with epoxy and re-drilling. And when you fill with epoxy, placing a plastic drinking straw through the middle of the existing hole before filling gives you a nice pilot hole when you get ready to re-drill. It needs to extend beyond the tape on both ends.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote