Quote:
Originally Posted by FishStretcher
Thanks!
Well, the hardener is ancient (but free, along with the resin- which is nice) so I mixed it 10% hot on hardener, so there is even more amine than usual. But the next layer I will mix correctly.
Good to know. It is just a door, so it is a great place to experiment. I plan or brushing on the gel coat. Along with the touch up on the console proper.
Next on the list is a vacuum bagged fuel tank hatch (mine is a resin rich pig of a thing) and splashwell for a master angler 20, as I can't find one. Probably epoxy/carbon with gel coat. Or vinylester/carbon.
|
If it has not blushed on its own? It usually happens very quickly in spring weather conditions. To mimmic that I think I warm it a bit with a heat gun or quartz light. then spray it with some water and let it cool and sit over night. Then warm one more time the next day if it has not blushed. sometimes it takes a second try to get it out. Just wipe with clean rags and let dry and then sand a little bit.