Quote:
Originally Posted by Makokeith
Looking really good!!! PLEASE try to post up some pics of where the stringers and the bracket come together. Are you going to close the bracket in from the bilge area?
This thread is making me think about building my own bracket for my formula 233.
|
2 pieces of 1/2 inch penske 20 that meet into the existing stringers at two different places or point in the same stringer system there is also a layer of Biaxial glass between the two layers. I think it makes the system fool proof. instead of one 3/4 or one 1 inch penske. It all gets glassed to the hull and the existing stringers and then to the bracket. along with the New transom all glassed to the new stringers the hull and the bracket. Then when the floor goes in the boat with bracket will probably will have No flex possible compared to most bolted on brackets. Way less weight. No chance of caulking changing and allowing water to enter without knowing. It all stays open so that you can reach the bottom bolts to the OB mount. I hope that answers all the questions and here is the best pictures I have of what you asked for. I will try to take some more tomorrow?