View Single Post
  #7  
Old 02-10-2012, 10:08 AM
SBD SBD is offline
Senior Member
 
Join Date: Jan 2010
Location: Ukiah CA
Posts: 130
Default

I use DuraTech to reduce it, it comes out much nicer. 1.8 at 55 psi lays down better than you would expect. Depending on your needs, you may call it done. This is just sprayed...



If you want it perfect, I use a DA w/ 220 to knock off the peel then 400 600 800 1000 on the DA. All dry. The compound, then polish. The finer grits on a 6 inch DA go fast.

It will come out like this...

Reply With Quote