The last layers of glass, and first couple passes with filler. I also re-cored the casting platform hatch using some scrap 1/2in penske board.
Then sanded the top of the hatch, removing the nonskid stripes, and then a layer of filler. I have a plan for this hatch and a decal that should be pretty cool when its done.
Other than that, its just fill, sand, fill sand. etc.
Casting platforms first layer of filler. I am not gonig nuts with the body work that will be under the nonskid. You can see the patch on the left side of the picture, it was a really strange crack that had a TON of filler in it, I believe it may have been from when they molded the boat it was much larger than I realized.
And the last layer of matt on the bow.
