Quote:
Originally Posted by hiliner222
Is there a material or epoxy to fill/smear over spidercracks when preping for repainting? Something that wont recrack? I've seen how there to be ground down til there gone and then filled and faired but this boat has alot of them so trying to save some labor time. See pic
|
I hate to be the bearer of bad news
...but there is no other way around than sanding down and glassing over. I basically did the whole cap and transom. Plus I did the bottom where the stringers where flexing and causing spider cracks. When I did a sea trial every place I glassed on the bottom held up and no cracks reappeared. However one place where I just ground out and filled showed a hairline again...so I glassed it and faired out.
Pick 2 out 3, Time-$-Fairing