View Single Post
  #6  
Old 05-22-2012, 05:34 PM
TooFly TooFly is offline
Senior Member
 
Join Date: Aug 2010
Location: North Shore, MA
Posts: 216
Default

Quote:
Originally Posted by jaybap View Post
Im interested. please post measurements. Hows the top and alum condition 1-10?
The width of the inner edges of the rear aluminum base pads is 43" (side to side). The forward pads are also 43" apart.

The dimensions of the top are ~ 82" x 59". I had to take these measurements on my own, so they're approximate.

There's a 2 1/2" tear in the canvas at the edge of the front. I'd otherwise give the canvas a 6. It's weathered but in good shape.

I'd give the aluminum a 7. A friend, who has several fully restored vintage cars, said the same. The aluminum is pretty bright and looks good. The welded joints are slightly pitted. No rust.

There are two access holes (1" maybe) near the top and bottom of the forward legs to run wires for lights, gps, antennas, etc. There are also two small holes drilled through the forward crossbar. Someone bolted the t-top to the console there.

I'll get some closeup iPhone pics in a bit.

Thanks,
Paul
__________________
1969 20' Potter SeaCraft
2007 150hp Evinrude E-TEC
Reply With Quote