j i have never used expoxy on anything i have ever built. as far has the fairing goes yes on the long board, air file too if you have a big compressor. i would not go with 3/8 coosa with glass on one side only. 1/2'' or 3/4'' nida core or divenacell would be good for that part of the cap with layers of 1708. i wouldn't cut corners with the glass work, people stand ,sit and jump off the dock on to that part of the boat. it's a large area that is not supported by much other than the front bulkhead for along way. everything you build should be glassed on both sides composite or wood a sandwich construction is by far better. the side where the bolster goes is just 1708 glass 3-4 layers, the white is the nida core later covered with glass.
|