Quote:
Originally Posted by kmoose
I have a 23 Tsunami, full top with a df 250 on a 12 inch set back aluminum bracket. I'm running a 20x16 suzuki 3 blade and getting 40 knots at 6100 with an offshore dive load and a couple of buddies. Can you trim the motor and gain speed and rpm? If so keep moving her up. This photo was before I changed props.
|
5650 was all I could squeeze out of her trimed up w/light load.There is only one hole left to go up.
I bought a 16x17 prop but didnt get to try it out yet.I'll raise her one more hole and see what happens before I change props. At least I have a spare now.
