Quote:
Originally Posted by Hemicj8
I just hopped on this thread but I'm dying to know is line-x not waterproof. And if you were to encapsulate this tank after being etched/primed and coated in line-x what would fail? If the line-x is a pure polyurea and can't absorb moisture I would see no problem. My guess is the rhino that fell off was a hybrid and may not have been prepped properly. I have personally sprayed aluminum tanks since 1999 and have yet to see a failure on a well prepped tank. Not all line-x is a pure polyurea so you would have to find a dealer near you that does a lot of light industrial work. There are over 100 different types of line-x products finding an applicator that applies the proper coating for the application is what you need. Line-x xs-350 is the product to look for. If you have any questions let me know. Pricing for a 100 gallon tank $275-$350 depending on dealer and what material they have in their lines. Changing over each way is about $75 of product loss. So if your interested you might have to wait a week or two. Good luck
|
"pricing for a 100gallon tank $275-$350 depending on the dealer"
using interprotect 2000e
interprotect 2000e barrier coat - retails for approx $90/gallon
gonna need approx 2 qts - 1 grey/one white
etch prime -approx $20 retail
this is what's required,materials wise,for that job...