Okay i had problems with the gelcoat and resin.. After i put a layer of2oz i started to see the glass bubble a little in some place.. And another place it had pulled from the mold.. I used mold wax and then brushed 3 coats of gelcoat no wax.. I then started laying glass the next morniging.. I tilted the mold up in the back so that the front and back were 90degrees to the floor.. It was in the front that it stared to pull from mold. I braced it up and then started laying three layers of 1708 i let kick off and pulled braces... Have you guys had this happen with gel coats
|