what about a hermco bracket that goes out to the second strakes?
Hi Don,
With running a 4S Merc, at close to 660 pounds, currently on an armstrong, 25" shaft. At some point I am going to need to pull it, and repaint(sand/etch/prime/paint), as not sure can make this happen on the boat without pulling the engine. My thought is not much more work to get a glass bracket and gain the extra float.
Anyhow, to sweeten the project, I would really desire to have a bracket that has 2 steps to mirror the 2 steps on the 23 SC, which would really seem to have max float? i would be extending to a 30" shaft at the time, for the larger bracket and getting the engine an extra 5" up.
What with the weight of 4S, might make sense for others not just me to think about a bracket with basically 2 steps matching the 23 hull steps?
Anyhow I run volvo ql tabs on the outside strake, so think there would be no issue there.
I know I wold have to fill the armstrong bolt holes in the transom.
__________________
---------
1977 Seacraft, Armstrong Bracket
275(chipped 250!) Verado
Merc Rev 4 17P
|