the transom sounds like its fine, as does the floor if you didn't find any soft spots just walking around. The areas that have fastners are the culprits but if sealed well should be fine. Sharp looking boat at rest I will say, and fast. You should be able to see the stringer system thru a bilge access panel in the splashwell, I made mine a bit bigger to make it easier to get to my bilge and livewell pumps and get at the wiring but you certainly can see in there. That needs to be sealed well at all times as thats the only bilge access for water intrusion, the splashwells on all of them will handle alot of water without issue
__________________
Any way you measure it - dumbass is expensive
|