Your friend has been very generous. Buy him a beer. You're going to like this boat.
Quote:
Originally Posted by Seafari78
...hooked it up and after a few spins she popped off...I did not run it long (20 seconds or so) because I want to change impeller since it has been sitting.
|
If the engine has been sitting, clean the carbs, too. As you know, two strokes get their lubricant through the fuel, so clogged passages or jets = no fuel= no lubrication = blown powerhead. It's an easy DIY job if you have the factory service manual or you know your way around a two stroke outboard. All you need is three carb gasket kits and a can of carb/throttle body cleaner. It may not need it, but it's cheap peace of mind.