transom
Here is the transom ply installed,I laminated the inside skin with the plywood laminate with thickend epoxy and cabilsil..Such A PiA. but it was worth it... Sorry no pics as i was working like a mad man... Left the wedges in till the next afternoon . pulled all wedges and the rearend is rock solid.. The remaining gap is just under 3/8" I have a sheet of 1/4 inch corecell I am going to laminate with two sheets of glass on the front and back to bring up the remaining Thickness needed. carefully wrapping the glass in and around the whole transom..So close but yet so far away..
|