I got a chance to work on the boat a little bit this evening... Cut out the side inner liner and removed the front deck.
Just when I thought that I had the transom completely ground and sanded down, I noticed a small area running along the very bottom of the transom skin that looked like it was delaminating. Stuck a pry bar into the delamination and sure enough, it started peeling off in sheets. So I worked on removing the top layer of glass that was probably added when the boat was tore into once before.
(Left Transom Side)... It tore off in sheets for a min, but then I had to resort to grinding the stuff that actually stuck pretty good down to the original glass. Notice the nice large woven glass.
Left side done... Still have the right side to do. LOTS of grinding!!!
