[flyingfrizzle]

I will try to scan a copy of it for you tonight. I could be anything from a short to a bad sensor. Process of elimination is you best friend here. It may be difficult due to it being such a short beep and it only happens at select times but if you start at one point and go threw each alarm device and the wiring you will find it. I like to test the sensors and alarms on a used motor when I buy one to verify it all works. You can use a good meter to simulate an alarm in and out to see if the wiring is functional or not. The fact that it only dose it for a second will make it a bit harder to find but good luck!