Unfortunately, I only used it on one side. I really just mimicked the factory layup with the exception of the plywood. I figured I couldn't tab it underneath so why waste the epoxy and mat since there is really no weight in the center of the fuel tank. Most of the weight is closest to the stingers. I'll add some more 1708-6" toward the center from the stingers to help out. I did have Sunshine to weld some tabs for the new tank to keep from laterally moving but I know the will not help from vertical compression from slapping on waves. I can walk on the tank bed now but 800lbs of fuel may crush my layup method.
|