well, things have been very hectic for me lately and I am not going to have time in the near future to finish.
1972 20' potter 4 stringer hull.
what has been done
composite transom has been installed little glass work to finish
boat was soda blasted and all bottom paint has been removed also bilge area was blasted to clean it up
all foam was cut and placed to raise stringers 2"
gunnel cap was glassed and filled to make an even 6" all the way around
hull was cored and glassed with 1708 and a layer of mat.
material and parts included
55 gallon drum of resin ( about 48 gallons left)
gallon of mekp
roll of stitch mat
roll of regular mat
3/4 divinycell scrim foam for floor more than enough for the floor
2 sheets of 1/2" divinycell 4'x8' rigid foam
2 sheets of 3/4" divinycell 4'x8' rigid foam
1 sheet of 1" divinycell 4'x10' rigid foam
1/2" of 2" foam left from stringers enough to build lateral bulkheads
7 gallons of divilette putty
5 gallons of polyfair fairing compound
console out of a 18 sf
I know there is more stuff I will look in the morning
here is the link to the work done
http://www.classicseacraft.com/commu...ad.php?t=24262
need trailer to pick up. everything can load into boat except drum of resin which I can fork into a pick up truck
3k
have about 5k into it.
I will leave it exclusive to CSC for a couple days before I throw it to the open market!
Pm or email
rocky0707@gmail.com
Payment Sent (Unique Transaction ID # 1XH77256RD2484455