It has been -1 here at night lately. I glued up some 1/2" H80 divinycell to make a 1" x 6" "hat channel" to replace that rancid 2x4, and better allow me to fit fuel tank fittings. If the old epoxy kicked (the wood stove is going), then I can rip chamfers to make it a trapezoid shape so I can lay glass on it. Cold west system epoxy doesn't pump very well. I bet the 5 gallon jug of resin was 45F...
I don't care for epoxy, but in this case, it will work. It won't need gel coat, and I can use it indoors in winter next to a wood stove without blowing myself up or stinking the house up.
|