Quote:
Originally Posted by Terry England
You might talk to Colin or Robin at Matson SeaMount off of 50th street and Causway Blvd. about your tank. They do a great job and will put an extra pick-up in there to put a pump ball on and every 3 months you can pump out the crud you either bought or made in the tank. They weld all the aluminum boats back together when the "Barney Fifes" over at McDill run into pilings while they are patrolling for the bad guys.
The guys in Tarpon Springs are "Quality Tee Tops", I believe. They are very good.
I'm using a fellow who is out in Highpoint (near the St. Pete / Clearwater airport) to help me re-do my 25 Bertram. Everyone who has seen the boat say "sheet, that guy knows what he is doing". I thought I knew all about fiberglass - I was in kindergarden! His name is Steve Quinneville and his phone numer is 727-365-3210. He worked for Ross Yacht, Intrepid, and those guys in Tampa that built the 6 prototype SEAL boats. Believe it or not, he makes the original Bertram work look a little "Bayliner-ly".
It is actually Seamount-Mattson at 813-248-8265
|
Thanks Terry, I'll call Steve as well.