Progress on this year's projects:
Removed glove boxes - 36 year old plywood was in good shape
Layer of woven and first round of fairing - also removed part of hand rail and sanded teak trim. Foil was to help curing process, had to keep halogen light on for a while because the weather up here has sucked a you know what. Cabin hatch I made last year from 1/2" fiberglass board, painted with Interlux Perfection. Applying non skid to it once the other surfaces are ready for finish coat.
Insulating fish box - cut and dry fit closed cell foam panels
Partially glassed in - hole allows access to water pump, will cover with access hatch. Sanded about a 3" piece of the bottom/aft foam piece to assist drainage - will install through hull to macerator pump.
Tomorrow's plan - fair and prime, finish glassing fish box, hopefully some other stuff. Will post pics and dimensions of doghouse for those who asked.
Mike