down to brass tacks
I used 4 mil poly to trace the existing bulkheads. These are rough oversize cuts in 3/4" H80 divinycel. I need to trim at least 3/4" all around for the trapezoidal spacer. I hope to glass them this weekend. And maybe glass them in place next week.
I am going to pull the under cockpit bulkhead first, despite my worries about hooking the hull.
I will try to put CSM on both sides simultaneously, fiberglass (raptor) stapled down, let that kick, then lay down the 1708.
And yes, those ARE brass tacks.
|