Quote:
Originally Posted by Tashmoo2
I am going to run my wires from the motor to console using the existing channel on the starboard side. I forgot to measure the location of the opening next to the fuel tank well.
Will you do me a big favor and measure the length of the opening and the distance for outside of transom to aft end of the opening
thank you
|
The opening length is about 24", tapers slightly top to bottom.
The distance from the aft end of the rigging channel opening to the inside of my transom is 71", so if it was finished with 1.5" core and the inner and outer skins, it would be about 73".