Quote:
Originally Posted by Lordwrench
disconnect the feed line going into the water separator (if you have one installed) and get a cheap siphon starter hand pump,it's like a little bellows looking thing.You can just bleed it all out of the line that feeds the engine.I would want to see the tank really, but more important remove it to clean the inside.If it's foamed in which is likely, it's a moot point and I would drain it from the tube and fill it and drain it agian.
B
|
I would prefer to try an empty the tank see what comes out. If it looks bad bad then yea I would remove the console and go through that process. But if not then heck I'm out on the water next week.