Quote:
Originally Posted by kmoose
It takes some measuring from around the pullies but an old belt you can cut up works great. Cut a piece that sits in the groove butted together and buy one 1/2 to 1" shorter. The belts have a considerable amount of stretch so don't worry. If you can get it on the big pulley and half way on the pump pulley it will go with just a bump or two of the starter.
|
That made me remember what someone told me he did years ago in the same situation - he had a short belt like what Moose said and just took out the pulley bolts to mount the belt then remounted the pulley and tightened the bolts.