back from florida and got some other stuff done.
I want to get this console put back together so I built 2 plugs for the console lid. one is 3/16" bigger all the way around. this is the one that gets put down in the mold to laminate over. The other is a template for the acrylic lid I will have made. I used the standard radius tool (WD40 can)
I got the plug for the hatch centered and nailed it down, once this was down I put some radius wax around the plug then on goes the mold release wax, PVA and a coat of Duratec.
tomorrow I will laminate it.
|