I got the panels filled back in with a mix of dynaglass and deck putty. I used something new, as I am getting to cheap to buy mason bags from homey cheapo. I saw a guy at the bakery using disposable piping bags. they are exactly the same thing and cheap. I wouldn't try to push potter putty through them but deck putty and dynaglass flowed smoothly through them
http://www.pjpmarketplace.com/polyPI...738&cadevice=c
I decided to mount the electronics on a black gelcoated panel. I marked off an area on the melamine and I sanded it down to 320 and waxed it , I sprayed the gelcoat down and let it kick, then 2 layers of matt dry, 1 layer of mat and 2 layer of 1708, I then added another layer of mat and a layer of stitch mat to stiffen it up.
I popped it off and gonna cut it , wet sand and buff. should look good