Quote:
Originally Posted by Bigshrimpin
Terry - Any idea on the size and location of the water ballast tank?
|
Check with Carla! She should have access to the design info! Skip said Carl had planned to use a bladder tank, which eliminates the need for a vent line! Otherwise, you would need a fairly large vent line to be able to quickly fill and drain the tank. I'd put it as far forward as possible up below the bunks to get the maximum leverage/trim change from it; I'd vote for largest size bladder that would fit, but you wouldn't necessarily have to fill it all the way. You might also want to mount a decent size fresh water tank up there too, since your CG will definitely be higher and further aft than what Connor and Dave are running. They could probably give you good advice on tank size!