Quote:
Originally Posted by Makover
Looking to swap 3 for 4 blade ,what pitch for a 23 without t-top and runs light all the time . Need to know if it should be a 14 x 18p or 14 3/4 x 19p may go alum to start to get dialed in,so I get the best performance and top end. Looking for near 50 mph if possible. This is a 250 EFI Merc ,may cup 18 if needed later.Feedback will help.
|
Makeover - U Might want to look at the Mirage in 17p with that set up it might spin a 19p maybe.
Also definitely check engine height with AV plate... These boats like to run at least 2" High on my last 23' i was running almost 3" high with the AV plate. No prop blow out and it would scoot.
Also as Shine stated... with his 250 having Trouble spinning the 19p i would say 17p.
Also u might search on Flyingfrizzle his threads. He runs a 225 merc EFI and has ran it on several boats.
Robert