If you don't need to replace the decks,and its a lot bigger job that one would think,figure out a way to get that stuff out from the sides.what model and year is the boat?you most definitely could cut some sides out enough to remove the crap ,in say ,3 different spaces per 6 feet.leave about 8" original,solid glass there,, between the cutouts.temporary glass each space back up,when you're cleaned out and move on down the stringers.once its all dry, level everything and reglass the sides ,leaving several 3inch or so pouring spots, up high to pour in expandable foam to refill everything.glass those spots up when you got everything filled.it would be important NOT to cut all the way to the hull bottom.leave at least 4" or so per 2' ,to hold original shape
|