Quote:
Originally Posted by sufius
Well, I just committed to a console over phone. Similar to the SeaCraft but a bit more narrow but a bit longer, originally from a C Hawk. I personally like it a bit better than the old console...maybe it's just because it has a door on the front  It was nice to buy local...and not have to pay $200-300 shipping only about $20 in gas :-)
34" wide
45" high
47 length w/seat
30" high towards driver - 10 @ 45 degrees - 11" @ 22 degrees - 11" level
Picking up the aluminum t-top also that needs some cleaning but was told no pitting. I'll try and pick it all up in my truck this week. I wasn't going to get a t-top due to budget but the price was right so went for it (over phone yikes!). It has a telephone booth enclosure that is junk but can use it as a template, which is why all the snaps. I mean those two things have been together for over 15 years...I'd hate to separate them now! |
It will Be tight but you will find room for all of your stuff on that console. I have a highly modified stock console from a 70sf and have room for all of the stuff you want to mount. I sectioned a few inches out of the middle to make it narrower, added a few inches to the bottom to make it taller, and added an extension to the top for flush mount electronics. What I ended up with looks similar to what you have there but about 30" wide and tall enough to work perfectly with a leaning post instead of a flip flop seat or something. Tape it off and start laying things out with a pencil until you get something you like