Quote:
Originally Posted by billythekid
pleated filters on the air intake side and you are ready to rock and roll,,,, of course after you push the car out you can have a party!!!!
|
Quote:
Originally Posted by Bushwacker
Do you have any problems with the fans blowing in bugs or dust? I think my friend, who is a serious perfectionist, set up the fans to pull air out, and used a bunch of furnace filters for the air intake,
|
The fans did have filters on them, the picture was token before I mounted them and sealed them off. I used standard 20x20" house air return filters and placed one over each fan, then used tape to seal them to the frame. Also we let the fans pull air and push it into the tent so that it would remain under positive pressure. The air was filtered before going threw the fan then the pressure inside of the tent keep any dust or bugs out. If it pulled air there are to many seams on the tent that would suck stuff in. Even with the seams the fans would keep the tent sides pushed out and all the seams had air pushing out of them so there was no back flow of dirty air. I don't have a pic of them installed prior to paint but found this one when we were testing the unit:
