Quote:
Originally Posted by uncleboo
Mine's an 18 and I ran new bow light wires from the switch out with the rest of the wires in the rigging channel then ran a metal fish tape down the side between the inner liner and hull. Wasn't too bad. I keep a fabric fish tape for adds through the rigging channel. It's long enough to tie into a loop and after fishing a wire, I untie it and stow the ends and I'm ready for next time..
|
I know its easy to fish a wire between the liner and the hull but how do you get it to come out of the hole cut out in the deck where all the rest of the wiring is ? I have a trolling motor plug installed in the liner and presently keep my two 12V battery in the fish box but I would like to relocate them under the console seat.
I also have a thin rope in the rigging channel for add on but I'm trying to find an alternative and more practical way instead of having to use excessive amount of wire by going from the bow all the way to the transom compartment and then back to the rigging hole in the deck under the console.