Quote:
Originally Posted by Stickalip
Thanks Caps,
FAS, thats the same dimensions on mine. With over 18.5' just on one side, looks like 3 separate pads, with one section being 8' long I hope the vinyl doesnt wrinkle towards the bow.
After spending more time then I wanna admit looking for the correct foam...rereading Old'sCool's thread I think the picture is looking much clearer.
Imo, that really is one of the most informative well done DIY threads. I initially thought one layer 1.5" or 2" thickness would be all thats required for the factory like look,,not so. O'sC, when you mentioned the 1/2'' foam was that also #6130?
|
Thank you. Not sure on the 6130. My backers were on the boat and appear to be 1/2" pvc or some type plastic. SS t-nuts under the foam 1/4"-20 bolts/washers from the back. Total of 4 pcs with the longest tapering towards the bow. Use Monel staples and not SS.