View Single Post
  #2  
Old 04-25-2016, 07:37 AM
kmoose kmoose is offline
Senior Member
 
Join Date: Jul 2006
Location: Ocala, Florida
Posts: 1,817
Default

Quote:
Originally Posted by 1bayouboy View Post
Thanks Jeff. For anyone that did raise the floor, it looks like just pulling the floors up would be very difficult. There's a ton of hardened putty gluing them to the stringers.
I thought one approach would be to cut out pieces of the existing floor leaving a grid pattern to put spacers on top of.....but that means a whole new floor over the spacers.
And a lot of weight if you leave that below the new floor. If your are considering raising the deck you cut it all out, remove putty and build coosa floor supports. Replace entire deck with nidacore and be done with it forever.
__________________
[b]The Moose is Loose !
Reply With Quote