Sell one and mount a single dead center of the keel. In all reality you could of gone with a transom mount and mounted it right next to the drain plug. That is where I mounted mine and it doesn't bother the motor whatsoever. Your bracket is much longer than mine so there would be no issue. I wanted to go thru hull as well but I didn't want to cut the center stringer but that would be the best place and I will make accommodations on my next build.
If you go with both thru hulls you will likely have to go with fairing blocks to get them low enough in the water.
__________________
[b]The Moose is Loose !
|