Quote:
Originally Posted by kmoose
I will let Shine make the call on the best fair and hi-build as I have paid to have mine done the last time. It's been so long I can't remember the name of the stuff I used when I still liked to get ichy.
I'll go do some checking with a friend who did his fountain recently.
|
Ken thank you for the reply. Appeciate it.
Quote:
Originally Posted by Capt Chuck
Robert
You can sand, wipe vlean, fair with Fasco Fastone 2 part
Epoxy $20. Then sand entire bottom, paint 2 coats
( mixed 8 /2/3) Signature Finish and be done with it. No primer needed... ask me or Bushwhacker for further help or questions..
My bottom lasted 15 + years given the same conditions (lift & trailer use only)
I docked in the water for 4 weeks at a stretch without issues.  |
Quote:
Originally Posted by Islandtrader
those were not blisters...they are little voids in the gel coat. No big deal. Just use epoxy putty and do what captain chuck said... I had the same problem and did it a little different then chuck, but the end result was the same. Visit my thread, post # 28...have fun  |
Captain Chuck and Trader, Thank you for the replys. I have ordered the fasco and called Tom on the Paint. Now all i need to figure out is how deep the high build will fill...
This is the boat that was in Fort Lauderdale the Tsunami. Nicks creative did a ton of the work 2 years ago and unfortunately someone must have been out too lunch. The more i dig the more issues i find. I was hoping that some glass work, crazing repairs and paint was all that was needed.
Right now, The Armstrong bracket bottom is touching the top of the Drain hole and it needs fixed, no way to even flare a brass tube or any kind of insert without removing the Armstrong bracket.... So trying to decide what too do... They did the wiring as well and its a Rats Nest and looks like a kindergarten Job.
I just need to take a slug of pictures and get some feedback... I might be better off to Just strip everything off, Raise the Armstrong Bracket and Rewire the whole boat. Could be faster....
Thanks Robert