Bushwacker -
Great idea on the anchors for the bulkheads - I was kind of worried about the integrity of the old wood under the floor that the sheet metal screws bite into.
I was planning to fill the old holes with epoxy, then drill new pilot holes, but that still relies on the wood. I like the anchor idea better. I may use that method in other spots too - like the door frame, where the holes are way oversized.
I cannot read the sticker, as some prior owner glued a veneer of plywood over it, and when I took it apart, the glue took off a lot of the numbers.
Is there a way to identify the null number or serial number any other source?
|