Thread: New Engine
View Single Post
  #9  
Old 11-24-2017, 11:03 AM
Bushwacker Bushwacker is offline
Senior Member
 
Join Date: Feb 2007
Location: N. Palm Beach, Fl.
Posts: 2,456
Default

Good choice! Most folks today have never run the 20’ hull with only 300 lbs on the transom, but I ran my Seafari for over 30 years with a 1975 “115” that probably wasn’t much more than 105 hp at the prop, but it rode and handled great! Cruised at 20 kts with a heavy load in 2-3’ square waves all day long at 4500 rpm and 2.8 mpg, with WOT of 34-35 mph. Gas mileage with the E-TEC should be 40-50% better than that! The ride with the bracket and ~420 lbs of motor mounted 30” further aft was noticeably worse until I added some bandaids like an AV plate fin and 4B prop!

I’d still recommend using Costa in the transom and using a 4B prop and/or a fin on the AV plate for even better low speed performance. Good luck with your restoration!
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975.
http://i188.photobucket.com/albums/z...Part2019-1.jpg
Reply With Quote