Thread: deadrise angle at each panel on each size
View Single Post
  #4  
Old 04-05-2018, 04:53 PM
Bigshrimpin Bigshrimpin is offline
Senior Member
  
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default
Quote:
Originally Posted by Bigshrimpin View Post
I've put an angle finder on my 23 and 25. The 23 is 20.5 and the 25 is 25.5. But how do you account for the vertical step when measuring the deadrise?
These measurements are only for the bottom v on each hull. This does NOT include 2nd or 3rd panels. Bottom V only.
Reply With Quote