Sprayed the starboard side today using Wildfire's recipe. Looks good so far. Been 1 hour and the gel coat is already set up. Mixed 2 ozs and 5 drops of hardener. Had plenty of time to spray. Actually sprayed all the gel coat, then lacquer thinner. I didn't realize I missed so many small holes. Anyone tell me what I can use to fill them in, (fairing compound?), and respray or do I grind them out again and start over? They are hard to see in the fiberglass, but jump right out at ya when the light color hits em. It's a lot of work, but I do like the spray gel coat. I used the small HF gun @ 35 psi. Very good spray pattern. I probably when overboard on the masking.
|