Quote:
Originally Posted by Samsdad57
Following with interest in your rehab.
I'm replacing my tank and hoses at the moment, and noticed the access holes that would be under the deck cap near the fuel fill. Wondering if they were like that from the factory or not to get to the fill and vent lines during assembly? I'll probably just put a 6in round deck plate on the side as I've seen before.
Would like to know if you've sourced a fuel tank shop, or who you'd recommend?
|
Those holes are indeed from the factory. Made the fuel hose replacement very easy. I had a friend build my tank. It's at least 1/8" thick and he added another baffle in it. Slid it as far forward as possible trying to improve the center of gravity.