Splashwell interference
John
You could take a sander or dremel tool and remove a little material from the splashwell. Not too much because you don’t want to crack out of the corner. However, if you do that your engine may simply rotate further and still hit it. Try to find a u-shaped cushioning material to wrap around the corner and if the engine touches it- so what. It might not work too well to wrap it completely around the splashwell due to outside corners and then inside corners. However if you duplicated my teak trim, you could end it at the aft face of the teak with only one bend in it. Maybe use ome adhesive with temporary masking tape.
|