I laid up two hatches as a learning process before tackling the big job. The layup is rock solid and the hatches fit great.
Today my son helped with the transom cap layup. We started spraying partall mold release. Then painted two coats of gelcoat. With all the small cavities the layup was hard. Hope we got all the air out. Two layers of csm and two of 1708. Took all day. Glad I had help. Also took 3 gallons of vinylester resin.
Tomorrow we will add the final layer of 1708 over the cossa reinforced. Then we can pop it and see how we did.
|