Rybones-
We float tested the boat in January after the deck was raised (but before the finish work was done) with the engine installed and with three guys on board. With all of that weight on board the scuppers are still two inches above the water line. We then poured a couple of 5 gallon buckets of water on the deck and the water flowed aft out the scuppers like it should.
The owner bought the console from Marine Connection Liquidators in Ft. Pierce. It only had core material where the binnacle mounts, so we had to core the rest of the console, gelcoat the inside and then gelcoat the outside to match the deck & gunwales.
Lastly, a "coke bottle" green 1/4 inch windscreen with a 7 inch radius on the corners will be arriving to finish off the console.
|